Table of Contents
Advertisement
Action
25
-
Backup the y-axis (paper feed direction).
The y-correction is done in the DI-Pilot
26
Verify and adjust a rare horizontal skew.
Installation Manual – Configuration DJet Software
Installation check list
Epson Models SC T3000-T5000-T7000
In DI-Pilot change to the tab "Setting".
For the y-correction, change the value
"Adjust distance bottom cam to print tool" .
During production (system is printing), the
parameter is accessible in the Tab "Settings"
A detailed explanation for the register
adjustment can be found in the chapter 6
"Register Front and Back Side"
See chapter 3.2.4
1
1-5
Advertisement
Table of Contents
