Epson D-Jet 300 Installation And Configuration Manual page 50

Hotfolder Mode
7
Setup Hotfolders
Assign to each input hotfolder an individual "Setup
hotfolder" template with the according work style.
Parameter name
(1) Setup File Name
(2) Positioning: Double Pages
(2) Positioning: Single Pages
Positioning: Work and...
(2)
(3) Parameters
To follow the example, the Setup File Name for the other "Setup hotfolders" templates would be:
Hotfolder2.pxs
Hotfolder3.pxs
Hotfolder4.pxs
Hotfolder5.pxs
Note
The link between the "hotfolder directory" and the template is by using the same name.
7-4
Function
Set this name equal the name of the hotfolder.
Printing different jobs on both sides
Job will be printed on the front side, back side is empty
Printing same job on both sides
Set the parameters for your work style. Define the front/back x, y
offset values for registration. Set the scaling factor if necessary.
Installation Manual – Configuration DJet Software