Epson D-Jet 300 Installation And Configuration Manual page 7

Action
Install DI-Plot and DI-Pilot.
Best performance is reached by installing the two
software packages to different hard disk drives.
Installation path setup recommendation:
On Hard Disk 1 (large disk)
- Install DI–Plot
- Printed Jobs
(= DI-Pilot Finished Jobs=archived jobs)
- Log Folder DI-Pilot
- Windows Print Spooler
15 Start and configure the DJet Control software.
16 Install the latest uEye Camera driver and connect
both cameras directly to the computer or to an USB
hub with external power supply.
Set the Camera ID's with the "uEye Camera
17
Manager" to:
Cam Top
Cam Bottom
18 Set the shutter from the camera lense between 8
and 16. The focus needs to be set to close-up.
19 Create for each camera a setup file with the uEye
Cockpit software.
Installation Manual – Configuration DJet Software
ID 1
ID 2
Installation check list
Epson Models SC T3000-T5000-T7000
Obtain the software from the DJet Product
CD or directly from our website in the
download area www.digiinfo.com
On Hard Disk 2 (small and fast SSD drive)
- Install DI–Pilot
- Print Files generated by DI-Plot
(= DI-Pilot Input Jobs)
- Camera Images
DJet Control is located in the same folder as
the DI-Pilot software.
Set the application compatibility mode to
"WinXP SP2" and select "Run as
administrator".
Do the same for DI-Pilot and DI-Plot
After starting up it is accessible through a
GREEN dot in the lower right corner.
Open the UI and select here the USB
Windows printer queue for the Front and
Back T-Series printer.
Run the installer from the Menu START
Programs Digital Information DI-Pilot
Installers  Installer uEye
Run the program from the Menu START
Programs IDSuEye  uEye Camera
Manager
See the manual "uEye Camera Setup Guide
DJet.pdf" in the application folder in subfolder
"PDF Manual"
1
1-3