Finalizing A Disc; Making Recording Of A Finalized Cd-Rw Disc Possible (Unfinalize Function) - JVC XL-R2010BK Instructions Manual

Finalizing a Disc

Finalizing a disc marks the final process in recording on a CD-R or
CD-RW disc. In this process, a TOC (Table Of Contents) is written
to the disc. When this procedure is completed, it will be possible to
play the CD-R or CD-RW disc on CD players compatible with CD-
R and/or CD-RW discs.
• Please note that once a CD-R disc has been finalized,
it is no longer possible to record to that disc.
• If the power of the unit is turned off or the AC power cord
unplugged from the wall outlet during the finalizing process, the
recording may be lost and the disc may no longer be usable.
• Even after a CD-RW disc has been finalized, further recording
and/or editing is possible if the TOC information on the disc is
erased using the Unfinalize function.
• When an unfinalized CD-R or CD-RW disc is loaded in the
CDR and the OPEN/CLOSE 0 button is pressed to open the
CDR disc tray, "FINALIZE?" is shown in the information dis-
play. To skip the finalization process, press the OPEN/CLOSE
0 button one more time or the CANCEL button (main unit/
remote control). The disc will be ejected in the unfinalized state.
XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY OPEN/CLOSE
STANDBY/ON
PLAY MODE CD EDIT CD REC
LEVEL PHONES
REC SOURCE
STOP PLAY PAUSE
SELECTOR
MIN MAX
STANDBY/ON
CD REC CD EDIT FINALIZE DISPLAY
1 2 3
4 5 6
7 8 9
+10
10
PLAY C O N T R O L
MODE REPEAT CD CDR
•
REC FADE SYNCHRO
REC MUTING
+
PITCH
SET
PITCH–
RM–SXLR2010A
REMOTE CONTROL
1
Press the FINALIZE button (main unit/remote
control).
• "FINALIZE?" is shown in the information display.
• If you want to cancel the finalization process at this point, press
the either the CDR Control OPEN/CLOSE 0 button or CAN-
CEL button (main unit/remote control).
2
Press the FINALIZE button again to start the
finalizing process.
• The length of time that this process requires is about 3 minutes.
During the procedure, the length of the level meter is used to
indicate approximately how much time is remaining until final-
ization is complete.
34
MULTI JOG/REC LEVEL
REC SOURCE OPEN/CLOSE
DIGITAL CD LINE MIC
–
SYNCHRO MENU SET CANCEL
LINE
MIX BLANCE MIC
FINALIZE STOP PLAY PAUSE REC/REC MUTING
MIC
CANCEL
1,2
1,2
CANCEL
• The CD player of this unit is compatible with finalized CD-RW
discs, however, not all CD players can play back CD-RW disc
even after they have been finalized.
• During the finalization process, it will not be possible to remove
or load discs in the CD player, nor is playback of CD loaded in
the CD player possible.
Making Recording of a
Finalized CD-RW Disc Possible
(Unfinalize Function)
Once a CD-R disc has been finalized, further recording on that disc
cannot be performed. However, if you erase the TOC (Table of
Contents) on a CD-RW disc, the disc can be recorded on again.
STANDBY
STANDBY/ON
PLAY MODE CD EDIT CD REC
LEVEL PHONES
REC SOURCE
STOP PLAY PAUSE
SELECTOR
MIN MAX
+
CD
LINE
3
4,5
1
Load a finalized CD-RW disc into the CDR disc
tray.
• The CD-RW and FINALIZED indicators will be shown in the
display window if the CD-RW disc that has been finalized.
2
When the unit is in the stop mode, press the
MENU button (main unit/remote control).
3
Turn the MULTI JOG control on the main unit or
2
press the /
control until "UNFINALIZE" is shown in the
information display.
4
Press the SET button (main unit/remote
control).
• "UNFINALIZE?" is shown in the information display.
• Press the CANCEL button (main unit/remote control) to cancel
the procedure and return to the normal display.
XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
OPEN/CLOSE REC SOURCE
DIGITAL CD LINE MIC
SYNCHRO MENU SET
FINALIZE STOP PLAY
2 4,5
STANDBY/ON
CD REC CD EDIT FINALIZE DISPLAY
1 2 3
4 5 6
7 8 9
+10
10
PLAY C O N T R O L
MODE REPEAT CD CDR
•
REC FADE SYNCHRO
REC MUTING
2
+
PITCH
SET
PITCH–
CANCEL
RM–SXLR2010A
REMOTE CONTROL
3
(menu) button on the remote
1 3
MULTI JOG/REC LEVEL
OPEN/CLOSE
– +
CANCEL
LINE CD
MIX BLANCE MIC LINE
PAUSE REC/REC MUTING
MIC
CANCEL