Test 8 – Error Code Test
•
The display will initially show "t8".
•
Press the Start button. If there are Errors, the Display
will show "t8" and then the display will show the last error
code.
•
The control will sort a maximum of 5 errors on a "first in,
first out" basis. This will be displayed continually until the
Start button is pressed.
•
Press the Start button and the Control will exit and
Power Off. This exercise will clear all faults and allow
the control to be operational again.
•
If there are no Errors, The Display will toggle between
"t8" and "nE" until start button is pressed. Press the
Start button and the Control will exit and Power Off.
g
GE imagination at work
GE Profile HE Washer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company
17