Test 7 – Alpha Spin Test
•
The display will initially show "t7".
•
Press the Start button, the SSD will initially
toggle between "t7" and the estimated RPM
(Speed is about 230RPM ± 20RPM.). The
control shall enable Alpha spin mode and
remain there for a maximum of 3 minutes (or
until the Cycle or Start button is pressed).
When Start button is pressed, returns to "t7".
When Cycle button is pressed, exit the test and
advance to test "t8".
g
GE imagination at work
GE Profile HE Washer (3/3/08)
GE CONFIDENTIAL & PROPREITARY INFORMATION - NOT FOR PUBLIC DISCLOSURE
Copyright 2008 General Electric Company
16