Garmin GPSMAP 76 Owner's Manual And Reference Manual page 51

Naming the Route — the GPSMAP 76 will automatically name the route
using the fi rst and last waypoint names as a reference. To change the Route
Name, place the highlight over the Name fi eld then press ENTER. When
you have fi nished, press ENTER to save the new name.
Editing a Route
To edit a route the unit must be on the Route Page. When editing a route
you can Insert a Waypoint, Remove a Waypoint, Reverse the Route, Delete the
Route or choose to edit the route on the Map Page. To display the Route Edit
Options, press the MENU Key.
Route Edit Options
Use Map — This will display the Map Page with the Route Line active and
the Map Pointer located on the waypoint highlighted on the Route Page.
'Review' Route Waypoint — To review information on a route waypoint,
place the Map Pointer on the waypoint then press ENTER. This will display
an options menu, highlight 'Review' then press ENTER to display the
waypoint information.
Inserting a New waypoint — There are two methods that can be used to
insert a new waypoint into a route.
1. Place the Map Pointer on the route leg that you want to insert the new
point in and the line will turn to a small dashed line. Press ENTER,
the Map Pointer will display "Ins" under it. Move the Map Pointer,
dragging the Route Line to the new location, then press ENTER. If the
new location is a Map Feature, the point will be inserted in the leg. If
the location is not on a Map Feature, the New Waypoint Page will be
displayed. Press ENTER to save the new waypoint, then ENTER again
to insert the new waypoint in the route.
Getting Started Reference
Main Menu
Routes
Route Edit Options
49 49