GBC DocuSeal 40 Operating Instructions Manual page 8

Carrier
Required
aminators are designed to run
o use the correct carrier will
eading edge of the document,
he machine.
switch to " Hat-Run" . GBC
mode switch to " Laminate"
and the rocker switch to
illuminate in approximately
two to seven minutes after
the machine is turned on.
laminated into a GBC
laminating pouch, so that the
borders are even on all sides.
3. Insert the pouch with the
item, sealed-edge first into the
leadered carrier that is included
with each carton of GBC
the sealed edge of the pouch
against the inside foldedl
sewn edge of the carrier.
contents straight into the
machine, leading with the
Handle
carriers carefully so that they
automatically exit the rear of
the pouch laminator. After the
pouch has stopped moving,
surface to cool for one
minute before removing the
finished pouch.
then move the switch to the