Place Call; Place Call Using Speakerphone; Place Call Using Headset - Cisco 7975G Software Manual

Place Call

Tips
• You can dial on-hook, without a dial tone (predial). To predial, enter a number, then go off-hook by
• When you predial, your phone tries to anticipate the number you are dialing by displaying matching
• If you make a mistake while dialing, press << to erase digits.
• If parties on a call hear a beep tone, the call may be monitored or recorded. Contact your system
• You can start or stop a recording by pressing the Record softkey on your phone.
• Your phone may be set up for international call logging, which is indicated by a plus (+) symbol on the
Related Topics
Hold and Resume, on page 27
Phone Features, on page 1
Handset, Headset, and Speakerphone, on page 61
Call Logs, on page 69
Place Call
Procedure
Pick up the handset and dial the number.

Place Call Using Speakerphone

Procedure
Step 1
Press
Step 2 Enter a number.

Place Call Using Headset

Procedure
Perform one of the following actions:
Cisco Unified IP Phone 7975G, 7971G-GE, 7970G, 7965G, and 7945G User Guide for Cisco Unified Communications
Manager 9.0 (SCCP and SIP)
20
lifting the handset, or by pressing Dial,
numbers (if available) from your Placed Calls log. This is called Auto Dial. To call a number displayed
with Auto Dial, press the number, or scroll to it and go off-hook.
administrator for more information.
call logs, redial, or call directory entries. Contact your system administrator for more information.
, or .
Calling Features