Speaker Setup For Htz-Bd30; Large Non-Skid Pads - Pioneer HTZ-BD50 Operating Instructions Manual

18 Installation

Speaker Setup for HTZ-BD30

Preparing the speakers
1. Attach the non-skid pads to the base of
each speaker.
For speaker stand bases:
Use the supplied adhesive to attach four
middle pads to the base (bottom) of each
speaker stand base.
3
For subwoofer:
Use the supplied adhesive to attach four
large pads to the base of subwoofer.
small non-skid pads

large non-skid pads

For center speaker:
Use the supplied adhesive to attach four
small pads to the base of center speaker.
2. Connect the wires to the player.
Connect the white wire with gray line into
(+) side and the other wire into (–) side. To
connect the cable to the player, press each
plastic fi nger pad to open the connection
terminal. Insert the wire and release the
fi nger pad.
small non-skid pads