Programme Type (Pty) - Blaupunkt Los Angeles MP72 Operating And Installation Instruction

RADIO MODE
Activating PTY
To use the PTY function,
Q press the TUNER button @ in ra-
dio mode.
The radio functions menu appears in the
display.
0 Press the softkey @ assigned to
the "PTY" display item.
When PTY is activated, the display
shows the current programme type. The
programme types are displayed along-
side the softkeys @.
Cancelling PTY
To cancel the PTY function,
0 Whilst the programme types are
being displayed, press the softkey
@ assigned to the "OFF" display
item.
Selecting a programme type and
starting seek tuning
The PTY menu is made up of several
pages on which the known programme
types are displayed. To browse through
the PTY menu's pages,
repeatedly press the NEXT button
@ until the required programme
type appears alongside one of the
softkeys.
Press the softkey @ assigned to
the required programme type.
Move the joystick @ up/right or
down/left to start seek tuning.
The next receivable station correspond-
ing to your selected programme type will
then be tuned into. If no station is found
20
l
BLdUPUNKT
-
that corresponds to the selected pro-
gramme type, you will hear a beep and
"NO PTY" appears briefly in the display.
The radio will then retune to the station
that was received last.
Note:
If you want to switch back to the pro-
gramme types display,
0 briefly move the joystick @ in any
direction.
Optimisins radio reception
Treble reduction feature during
interference (HICUT)
The HICtJTfunction improves the sound
during poor radio reception. If interfer-
ence occurs, the treble is automatically
reduced thus reducing the interference
level.
Activating HICUT
0 press the TUNER button @ in ra-
dio mode.
The first page of the radio functions
menu is displayed.
0 Press the NEXT button @.
Q Press the softkey @ assigned to
the "HCUT" display item.
0 Move the joystick @ up/right or
down/left to adjust the HiCut.
"HICUT 0" equates to the lowest reduc-
tion of the interference level, "HICUT 3"
is the highest reduction.
0 Press the joystick OK @ or the
MENU button @ to close the
menu.
The settings are saved.