Advertisement
ZLX Wall Mount Bracket
ZLX Wall Mount Bracket–Horizontal Installation
To horizontally wall mount a ZLX Series loudspeaker, do the following:
Caution!
Due to the weight of the loudspeaker system, it is imperative the bracket be properly secured
!
to the wall. The choice of fastener (not supplied) will be determined by the material and
construction of the mounting surface.
1.
2.
3.
ZLX-12P/ZLX-12
Figure 2.6: Guide onto U-bracket—Horizontal
4.
5.
6.
2013.05 | 01 | F01U285494
Using fasteners suitable for the wall material (not supplied), attach the U-bracket to the
wall.
Lift and rotate the loudspeaker to a horizontal position where the side handle is on the
top.
Lift the loudspeaker and place the upper mount onto the pivot pin on the left side of the
U-bracket (see Figure 2.6).
Ensuring the lower U-bracket pivot pin is securely placed in the notch, guide the lower
mount into position (see Figure 2.6).
The loudspeaker is loosely hung; rest the loudspeaker against the mounting surface.
Position the loudspeaker for the desired angle (see Figure 2.4).
Insert and tighten the two (2) screws (supplied) sufficiently so that the loudspeaker does
not inadvertently rotate.
ZLX-15P/ZLX-15
Installation Guide
Electro-Voice
Advertisement
