Advertisement
Upper Mount
(up position)
Lower Mount
(up position)
Figure 2.2: Attach Mounts
4.
ZLX Wall Mount Bracket–Vertical Installation
To vertically wall mount a ZLX Series loudspeaker, do the following:
Caution!
Due to the weight of the loudspeaker system, it is imperative the bracket be properly secured
!
to the wall. The choice of fastener (not supplied) will be determined by the material and
construction of the mounting surface.
1.
2.
Electro-Voice
ZLX-12P/ZLX-12
Using the four (4) screws you removed from the bottom handle, attach the lower mount
to a ZLX loudspeaker where the bottom handle was located in the up position.
Using fasteners suitable for the wall material (not supplied), attach the U-bracket to the
wall.
Lift the loudspeaker and place the upper mount onto the pivot pin on top of the
U-bracket (see Figure 2.3).
Upper Mount
(down position)
Lower Mount
(up position)
Installation Guide
en
ZLX-15P/ZLX-15
2013.05 | 01 | F01U285494
5
Advertisement
