Page 1
ZLX Wall Mount Bracket ZLX-BRKT en | Installation Guide...
Page 3
The user is responsible for making sure that the wall or ceiling is capable of supporting the loudspeaker. Any hardware used to suspend a loudspeaker that is not associated with Electro-Voice is the responsibility of others. Electro-Voice Installation Guide 2013.05 | 01 | F01U285494...
Using the four (4) screws you removed from the top handle, attach the upper mount to a 15 inch ZLX loudspeaker where the top handle was located in the down position (see Figure 2.2). 2013.05 | 01 | F01U285494 Installation Guide Electro-Voice...
Using fasteners suitable for the wall material (not supplied), attach the U-bracket to the wall. Lift the loudspeaker and place the upper mount onto the pivot pin on top of the U-bracket (see Figure 2.3). Electro-Voice Installation Guide 2013.05 | 01 | F01U285494...
Page 6
Position the loudspeaker for the desired angle (see Figure 2.4). 30° 45° 15° 15° 30° 45° Figure 2.4: Angle Degrees Insert and tighten the two (2) screws (supplied) sufficiently so the loudspeaker does not inadvertently rotate (see Figure 2.5). 2013.05 | 01 | F01U285494 Installation Guide Electro-Voice...
Page 8
The loudspeaker is loosely hung; rest the loudspeaker against the mounting surface. Position the loudspeaker for the desired angle (see Figure 2.4). Insert and tighten the two (2) screws (supplied) sufficiently so that the loudspeaker does not inadvertently rotate. 2013.05 | 01 | F01U285494 Installation Guide Electro-Voice...
Page 9
Install the the upper and lower mounts onto the opposite handles (see Installing ZLX Mounts). Note: The upper mount is attached to where the lower handle was located and the lower mount is attached to where the upper handle was located (see Figure 2.8). Electro-Voice Installation Guide 2013.05 | 01 | F01U285494...
Page 10
The loudspeaker is loosely hung; rest the loudspeaker against the mounting surface. Position the loudspeaker for the desired angle (see Figure 2.4). Insert and tighten the two (2) screws (supplied) sufficiently so the loudspeaker does not inadvertently rotate (see Figure 2.7). 2013.05 | 01 | F01U285494 Installation Guide Electro-Voice...
Shipping Dimensions: 505 mm x 130 mm x 100 mm (19.88 in x 5.12 in x 3.94 in ) Net Weight: 1.70 kg (3.75 lb) Shipping Weight: 1.90 kg (4.19 lb) Table 3.1: Specifications Quantity Description U-bracket Upper mount Lower mount Screws Table 3.2: Components Electro-Voice Installation Guide 2013.05 | 01 | F01U285494...