Connections; Connecting To Television - Toshiba SD-680KY Owner's Manual

Connecting to television

IMPORTANT!
You only need to make one video connection
from the following options, depending on the
capabilities of your television.
Connect the DVD player directly to the television.
Using Composite Video Jack (CVBS)
NS
A
Use the composite video cable(yellow) to connect
the DVD player s VIDEO OUT (CVBS) jack to the
video input jack(or labelled as A / V in , Video In or
Composite ) on the TV(cable supplied).
To hear the sound of this DVD Player through your
TV, use the audio cables (white/red) to connect
AUDIO OUT (L / R) jacks of the DVD player to the
corresponding AUDIO IN jacks on the TV ( cable
supplied ).
Using Component Video Jacks(Y P
MAINS
Helpful hint: before making or changing any connections, make sure that all the devices are
disconnected from the power outlet.
IMPORTANT!
The progressive scan video quality is only pos-
sible when using Y P
TV is required.
A
Use the component video cables (red/blue/green) to
connect the DVD player s Y P
responding Component video input jacks (or labelled
as Y P P ) on the TV (cable not supplied).
b r
B
Use the audio cables (white/red) to connect AUDIO
OUT (L/R) jacks of the DVD player to the correspond-
ing AUDIO IN jacks on the TV (cable not supplied).
C
Proceed to page 10 for detailed Progressive Scan set
up.
Using a RF modulator
MAINS
IMPORTANT!
If your TV only has a single Antenna In jack (or
labelled as 75 ohm or RF In), you will need a RF
modulator in order to view the DVD playback on
the TV.
P )
B R
A
Use the composite video cable (yellow) to connect
the DVD player s VIDEO OUT (CVBS) jack to
the video input jack on the RF modulator (cable
supplied)
To hear sound of this DVD player through your
TV, use the audio cables(white/red) to connect
AUDIO OUT (L/R) jacks of the DVD player to the
corresponding AUDIO IN jacks on the RF modulator
(cable supplied).
B
Use the RF coaxial cable (not supplied) to connect
ANTENNA OUT or TO TV jack on the RF modulator
to the ANTENNA IN jack on the television.
C
Connect the Antenna or Cable TV service signal to
the ANTENNA IN or RF IN jack on the RF modulator.
(It may have been connected to your TV previously.
Disconnect it from the TV.)

Connections

P and a progressive scan
B R
P jacks to the Cor-
B R
6