Using The Video Setup Menu - Toshiba SD-680KY Owner's Manual

DVD Menu Options (continued)

Using the Video setup menu

A
Press SETUP on the remote control.
The system setup menu appears.
B
Press / to select { Video }, then press
C
Press / to select an item, then press
access.
Example: { Video Out }
The options for the selected item appears.
If the selection in the menu is greyed out, that
means the feature is not available or not possible to
change at the current state.
D
Use / to select a setting and press OK to con-
firm.
Example: { P-Scan }
The setting is selected and setup is completed.
E
To exit, press SETUP.
Aspect Ratio
The picture shape can be adjusted to fit your TV and
the format must be available on the playback disc.
Otherwise, the TV display will not affect the picture
during playback.
A
In Video , press /
then press .
{ 4:3 }
Select this if you have a normal TV. A wide-screen
source, display with black bars on the top and bottom
will be displayed on the TV screen.
{ 16:9 }
Select this for wide-screen TV (frame ratio 16:9).
B
Use / to select a setting and press OK to con-
firm.
View Mode
Use view mode to scale an image that fits to the TV
screen s width and height.
A
In Video , press /
then press .
{ Fill }
Fill the screen with decoded image.
{ Original }
Display image as its original size.
{ Height Fit }
Fit the screen height with image height.
{ Width Fit }
Fit the screen width with image width.
{ Auto Fit }
Automatically fit the decoded image on screen with-
out distortion.
{ Pan Scan }
Automatically display decoded image on full screen
Helpful hint: Press
Press SETUP to exit the menu item.
17
to
to select {Aspect Ratio },
to select { View Mode },
to go back to previous menu item.
without distortion.
B
Use / to select a setting and press OK to con-
firm.
Tip:
- Depending on the type of discs, you may not be
able to view the mode as selected.
TV System
The video standard of the DVD player output can be
selected from "NTSC", "PAL" or "Multi".
{ NTSC }: Select if your TV system is NTSC.
{ PAL }: Select if your TV system is PAL.
{ Multi }: The DVD video player automatically identi-
fies PAL or NTSC video system of a disc. Connect
a multisystem TV (PAL/NTSC compatible) to view a
picture.
A playback picture may be distorted when detected a
signal change between PAL and NTSC on the disc.
For the case of Progressive mode, your multisystem
TV must be able to support 525p and 625p.
Video Out
. The video output of the DVD player can be selected
as "Component" or "P-Scan".
A
In Video , press /
then press .
{ Component }
Select this for component video connection.
{ P-Scan }
Select this when you connect your DVD player to
your TV, which has component video inputs that sup-
ports progressive scan.
B
Use / to select a setting and press OK to con
firm.
Smart Picture
This DVD player provides four predefined sets of
picture color settings.
A
In Video , press /
then press .
{ Standard }
Select this for a preset standard picture setting.
{ Vivid }
Select this to make the picture brighter.
{ Cool }
Select this to make the picture softer.
{ Personal }
Select this to personalise your picture color by ad-
justing the brightness, contrast, tint and color (satu-
ration).
B
Use / to select a setting and press OK to con-
firm.
C
If you select { Personal }, then proceed to steps
D~G.
The setup menu appears.
Brightness
Contrast
Tint
Color
to select { Video Out },
to select {Smart Picture },
0
0
0
0