Table of Contents
Advertisement
EXTERNAL COMPONENT OPERATIONS
Playing an external component
You can connect the external component to the CD
changer jack on the rear using the Line Input Adaptor
KS-U57 (not supplied).
Preparations:
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
• Before operating the external component using the
following procedure, select the external input
correctly. (See "To select the external component to
use – EXT IN" on page 18.)
1
Select the external component
(LINE IN).
TAPE
• If "LINE IN" does not appear on the display, see
page 18 and select the external input ("LINE IN").
• Displayed only when one of the following
sources is selected – FM, AM and tape.
Note on One-Touch Operation:
When you press TAPE CD-CH, the power
automatically comes on. You do not have to press
to turn on the power.
22
LINE IN
TAPE
(or CD)
200W
KS-FX480
Multi
TAPE
Music
Scan
2
Turn on the connected component
and start playing the source.
3
Adjust the volume.
4
Adjust the sound characteristics
you want. (See pages 13 – 15.)
Advertisement
Table of Contents
