Levels - Tascam M-300 Series Operation & Maintenance Manual

PGM OUT/TAPE RTN MONITOR
1-7.
SYSTEMS
1)
PGM OUT Monitor System
(PGM --> STEREO OUT L & R)
nominal level ( see paragraph 1 -4 . 9) I . pr ess the
With the level at the PGM OUT 1
monitor ON switch, situated in the TAPE RTN
monitor control rack (green LED lights). By
adjust ing the TAPE
pots (Stereo Master Faders should be in the
shaded area as set in paragraph 1 - 1 1 , confirm
that the STE R E O OUT jacks provide nominal
levels indicated in the table in paragraph 1 -6.
I_,... U -.1
, · �.�
<'I"> *il
-
4 jacks set to
RTN PAN and LEVEL
Monitor O N switches 1 and 5 select the PGM
OUT 1, monitor ON switches 2 and 6 the PGM
OUT 2, monitor ON switches 3 and 7 the
PGM OUT 3, and monitor ON switches 4 and 8
the PGM OUT 4.
2) TAPE RTN Select Switch
Connect a - 1 0 dBV, 1 k Hz signal to the TAPE
IN jacks and confirm that the STEREO OUT
when the TAPE RTN select switch is depressed.
source switches from PGM OUT to TAPE IN
1 - 9
10 ....
��. T �I'_ i
f." � T!
1
! · · -·