Voltage Conversion - Tascam M-300 Series Operation & Maintenance Manual

VOL TAGE CONVERSION
is adjusted
This mixer
voltage specified on the packing carton.
Note: This voltage conversion is not possible on
models sold in the U.S.A. and Canada,
U.K., Australia or Europe.
For general export units, if it is necessary to
change the voltage requirements of this mixer to
match your area, use
ALWAYS D ISCONNECT POWE R L I N E CO RD
B E F O R E MAKING T H ESE CHANGES.
'
B
60
l t
to operate on the e ec
procedures.
the following
e!l
1 . Turn
ric the mixer upside-down on a soft surface.
2. Remove screws A (two) and B (quantity of
B differs a
3. Remove t
oc
4. L at the voltage selector plug near the
e
transformer inside the unit.
5. Pull out the plug and reinsert it so that the
d i
es red voltage can be read through the cut·
out window of the plug.
6. Replace the panel.
ls ) .
o g od
m
n m e
e p ne .
h a l
A
61