Storing Dab Services In Memory - JVC KD-SH99R Instructions Manual

Storing DAB services in
memory
You can preset up to 6 DAB services in each DAB
band (DAB1, DAB2 and DAB3) manually.
1
Select the DAB tuner.
When you select a source,
the power automatically
comes on.
Each time you press the
button, the source changes
as described on page 7.
2
Select the DAB band (DAB 1, DAB 2
or DAB 3) you want.
Each time you press and
hold the button for more than
1 second, the DAB band
changes as follows:
D1
(DAB 1)
3
Tune into an ensemble you want.
4
Select a service of the ensemble you
want.
D3
D2
(DAB 2) (DAB 3)
1 Press M/B (mode/band).
2 Press and hold ¢
4 to select a
or
service you want.
5
Press and hold the number button
(in this example, 1) you want to
store the selected service into for
more than 2 seconds.
"P 1" flashes for a while.
6
Repeat the above procedure to
store other DAB services into other
preset numbers.
Notes:
• A previously preset DAB service is erased when a
new DAB service is stored in the same preset
number.
• Preset DAB services are erased when the power
supply to the memory circuit is interrupted (for
example, during battery replacement). If this
occurs, preset the DAB services again.
43