Playing A Cd Text; Prohibiting Disc Ejection - JVC KD-SH99R Instructions Manual

To play back only intros (Intro scan)
You can play back the first 15 seconds of each
track sequentially.
1 Press M/B (mode/band) while
playing a disc. This unit enters
the functions mode.
2 Press INT (intro scan) while
still in the functions mode, so
that the "INT" appears on the
display.
4
Then, each time you press
INT, intro scan play mode
turns on and off alternately.
Track number of the
currently playing track

Playing a CD Text

In a CD Text, some information about the disc (its
disc title, performer and track title) is recorded.
You can show these disc information on the
display.
1
Select text display mode while
playing a CD Text.
Each time you press the button,
the display changes as follows:
Disc Title / Performer
Current track no.
and Elapsed playing time
Notes:
• The display shows up to 10 characters at one time
and scrolls if there are more than 10 characters.
See also "To select the scroll mode – SCROLL" on
page 32.
• When you press D (display) while playing a
conventional CD, "NO NAME" appears for the disc
title/performer and the track title.

Prohibiting disc ejection

You can prohibit disc ejection and can lock a disc
in the loading slot.
Note:
If you press 0 while disc ejection is prohibited, the
control panel moves down, but the disc cannot be
ejected.
To return the display panel to its previous position,
press 0.
To cancel the prohibition and unlock the disc,
press and hold 0 for more than 2 seconds again,
while pressing SEL.
"EJECT OK" flashes on the display for about 5
seconds, and the disc is unlocked.
Track Title
While pressing SEL (select),
press and hold 0 for more than 2
seconds.
"NO EJECT" flashes on the
display for about 5 seconds, and
the disc is locked and cannot be
ejected.
19