Storing Your Own Sound Modes - JVC KD-SH9105 Instructions Manual

Storing your own sound modes

You can adjust the sound modes to your preference
and store your own adjustments in memory
(USER 1, USER 2 and USER 3).
1
Press SEL (select) twice to show the
sound mode selection screen.
The last selected sound mode is
SEL
called up.
Ex. When "R & B" is selected previously
2
Press the number button to select
one of the sound modes listed on
the display.
1 2 3
• This unit has two sound mode selection
screens. To move to the other screen,
press 5 (up) or ∞ (down).
3
Enter the sound adjustment mode.
The following sound mode
adjustment screen appears
on the display.
4
5
4 5 6
6
Make adjustments as you like.
Buttons used for adjustments
Press ¢
1)
or
frequency band—60Hz, 150Hz, 400Hz,
1kHz, 2.4kHz, 6kHz, 12kHz.
Press 5 (up) or ∞ (down) to adjust the
2)
level of the selected band within the
range of –05 to +05.
3)
Repeat steps 1) and 2) to adjust the
other frequency bands.
Store the adjustment you made.
The confirmation message
SEL
appears—whether you want to
store the adjustment.
If you want to cancel the adjustment,
press DISP (D).
• Adjustment you made remains effective
until you select another sound mode.
Press number button 1, 2 or 3 to
select one of the user sound modes
(USER 1, USER 2, or USER 3) you
want to store into.
1 2 3
Ex. When you select "USER 1."
4 to select the
4 5 6
29