Storing Your Own Sound Modes - JVC kd-g845 Instructions Manual

3
Turn the control dial to adjust the
subwoofer output level. [0 to 8]
4
Press number button 1 (
to select the subwoofer phase.
[0deg (normal) or 180deg (reverse)]
C
VolAdjust, [–5 to +5]
Turn the control dial to adjust the input level
of each source (except FM).
Adjust to match the input level of the FM
sound level.
• Before making an adjustment, select the
source you want to adjust.
D
Loudness, [Off or On]
Turn the control dial to select "Off" or
"On." When "On" is selected, low and high
frequencies sound are boosted to produce a
well-balanced sound at low volume level.
4
Exit from the setting.

Storing your own sound modes

You can adjust the sound modes and store your own
adjustments in memory.
• When is shown on the display, you can
move back to the previous screen by pressing number
button 6.
1
or
2
Select a sound mode.
3
Select a frequency range.
Downloaded from Caradio-Manual.com Manuals
22
4
Adjust the sound elements of the selected
frequency range.
)
5
1
Use
2
Press number button 5 (
the control dial to select the frequency.
3
Press number button 5 (
the control dial to select the quality slope (Q).
Sound
elements
Frequency
Level
Q
5
Repeat steps 3 and 4 to adjust the other
frequency bands.
6
Store the adjustments.
∞
/ to adjust the level.
Range/selectable items
Low Mid
60 Hz 500 Hz
80 Hz 1 kHz
100 Hz 1.5 kHz
200 Hz 2.5 kHz
–6 to +6 –6 to +6 –6 to +6
Q1.0 Q0.5
Q1.25 Q0.75
Q1.5 Q1.0
Q2.0 Q1.25
), then turn
), then turn
High
10 kHz
12.5 kHz
15 kHz
17.5 kHz
Fix