Table of Contents
Advertisement
Connection Examples for KX-TDA100/KX-TDA200/KX-TDA600/KX-TDE100/
KX-TDE200/KX-TDE600
Note for KX-TDE100/KX-TDE200 (PMMPR Software File Version 1.xxxx) Users
When connecting both KX-T0155 and KX-T0158 CSs to the same card, the KX-T0158 CSs must be
connected to lower-numbered pins on the card than the KX-T0155 CSs.
Refer to the following examples to connect a CS to the PBX.
KX-T0155 connecting to KX-TDA100/KX-TDA200/KX-TDA600/KX-TDE100/KX-TDE200/
KX-TDE600
Note
The illustration of the PBX is based on the KX-TDE200.
Cable
26 AWG:
24 AWG:
22 AWG:
CS (RJ11)
Signal Name
Pin No.
D1
D2
Accessories and User-supplied Items for the CS
Accessories (included): Screws ´ 2, Washers ´ 2
User-supplied (not included): RJ11 connector
Note
For details about the DHLC/DLC card, refer to the Installation Manual for your PBX.
Document Version 2009-12
Maximum Distance
222 m (728 ft)
347 m (1138 ft)
500 m (1640 ft)
1
2
3
4
7 Connecting a Cell Station to the PBX
DHLC8 Card
DHLC/DLC card (Amphenol)
Signal Name
D1
D2
Quick Installation Guide
29
Hide quick links:
Advertisement
Table of Contents
