Tuning Into A Preset Station; Selecting Fm Reception Sound - JVC KD-MX2800R Instructions Manual

Tuning into a preset station

You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see pages 7
and 8.
1
FM/AM
2
7
1
To change the display information while receiving an FM RDS
station
Press DISP. Each time you press the button, the display changes as follows:
Station Frequency

Selecting FM reception sound

When an FM stereo broadcast is hard to receive:
Press MO/RPT (Mono/Repeat) while listening to an FM stereo broadcast. "MONO" appears
on the display and the sound you hear becomes monaural but reception will be improved.
MO
RPT
Lights up when receiving an FM broadcast in stereo.
To restore the stereo effect, press the same button again.
2
Select the band (FM1, FM2, FM3 or AM) you
want.
8 9
2 3
Select the number (1 – 6) for the preset station
you want.
PTY (Programme type)
1
10 11
4 5
DISP
12
6
PS (Station name)
9