JVC KD-MX2800R Instructions Manual page 39

3
DISP
4
5
SSM
6
Repeat steps 3 to 5 until you finish inputting the name.
7
SEL
To erase the input characters
Insert spaces using the same procedure described above.
Note:
When you assign a name to the 47th disc, "NAME FULL" appears on the display. (In this case, delete
unwanted names before assignment.)
Select the character set you want while " "
is flashing.
Each time you press the button, the character set changes
as follows:
Capital letters
Numbers and symbols
Select a character.
About the available characters, see page 40.
Move the cursor to the next (or previous)
character position.
Press the button while the last selected
character is flashing.
The input name is stored in memory.
Small letters
39