Radio Operations; Listening To The Radio - JVC EXAD KD-LHX601 Instructions Manual

RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select the FM/AM tuner.
2
Select the band (FM1 – 3, AM).
FM1
Selected band appears.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
10
Each time you press and hold
the button, the FM/AM tuner
and the DAB tuner are
alternately selected.
Each time you press the button,
the band changes as follows:
FM2 FM3
3
Start searching a station.
To search stations of lower frequencies
When a station is received, searching stops.
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching a station manually:
Manual search
1
Select the FM/AM tuner.
AM
2
Select the band (FM1 – 3, AM).
To search stations of
higher frequencies
Each time you press and hold
the button, the FM/AM tuner
and the DAB tuner are
alternately selected.
Each time you press the button,
the band changes as follows:
FM1 FM2 FM3 AM