Saeco Energica HD8851 User Manual page 62

ENGLISH
60
Help Message Displayed
INSERT WATER SPOUT
ESC
INSERT
CAPPUCCINATORE
ESC
INSERT
CAPPUCCINATORE
COVER
ESC
INSERT VALVE
INTO
CAPPUCCINATORE
ESC
RESTART TO SOLVE
How to Reset the Message
Insert the hot water dispenser to start dispensing. Press ESC to exit.
Insert the Cappuccinatore to start pouring. Press ESC to exit.
Insert the Cappuccinatore cover to start brewing; see point (7) of sect.
"Daily Cleaning of the Cappuccinatore". Press "ESC" to exit.
Insert the valve in the Cappuccinatore to start brewing; see point (8) of
sect. "Daily Cleaning of the Cappuccinatore". Press "ESC" to exit.
The machine needs to be descaled. Follow the steps described in the
"Descaling" chapter of this manual.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case repair is NOT covered under your warranty.
The machine needs the "INTENZA+" water fi lter to be replaced.
Red light fl ashes. Press the "
Take note of the code (E xx) shown in the display at the bottom.
Turn off the machine. After 30 seconds, turn it on again. Try this 2 or 3
times.
If the machine does not start, contact the Philips SAECO hotline in your
country and tell them the code shown in the display. You can fi nd its
contact details in the warranty booklet by-packed separately or on
www.philips.com/support.
" button to exit the stand-by mode.