Table of Contents
Advertisement
Creating your own color—User
You can create your own colors—"Day" and
"Night," and select them as the display color for
any desired source.
• Day:
Can be used as your user color during
the day time*.
• Night:
Can be used as your user color during
the night time*.
* Depends on the "Dimmer" setting.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See pages 36 and 37.)
2
Press number button 6 to select
"COLOR"—Color category of the
PSM settings.
3
Select "User" as a color.
To select which source to apply your user
color to, select the target source first by
pressing 5 (up) or ∞ (down), before
selecting "User" in this step.
42
The next-step-operation
buttons start flashing.
The user color will be applied
to the currently selected
source (the one shown on the
upper portion of the display.
In this example "All SRC").
4
Select the user color adjustment
screen.
5
Select "Day" or "Night" which you
want to make an adjustment for.
6
Adjust the selected user color.
1) Press ¢
one of three primary colors—"R"
(red), "G" (green), and "B" (blue).
2) Press 5 (up) or ∞ (down) to
adjust the selected primary color.
You can adjust within the range of 00 to
11.
3) Repeat steps 1) and 2) to adjust
the other primary colors.
7
Repeat steps 5 and 6 to adjust the
other user colors—"Day" or "Night."
8
Finish the setting.
One of the user color
adjustment screens
appears.
"User Day" or "User
Night" is shown on the
left side of the display.
or 4
to select
Advertisement
Table of Contents
