Table of Contents
Advertisement
To change the FM tuner selectivity
—IF Filter
In some areas, adjacent stations may interfere
with each other. If this interference occurs, noise
may be heard.
• Auto:
When this type of interference
occurs, this unit automatically
increases the tuner selectivity so
that interference noise will be
reduced. (But the stereo effect will
also be lost.)
• Wide:
Subject to the interference from
adjacent stations, but sound quality
will not be degraded and the stereo
effect will not be lost.
To turn the key-touch tone on or off—Beep
You can deactivate the key-touch tone if you do
not want it to beep each time you press a button.
• On:
Activates the key-touch tone.
• Off:
Deactivates the key-touch tone.
To select the external component to use
—Ext Input
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adapter KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select
which component—CD changer or external
component—to use.
• CHANGER: To use the CD changer.
• LINE IN:
To use the external component
other than CD changer.
Note:
For connecting the Line Input Adapter KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
To select the telephone muting—Telephone
This mode is used when a cellular phone system
is connected. Depending on the phone system
used, select either "Muting1" or "Muting2,"
whichever mutes the sounds from this unit.
• Muting1:
Selects this if this setting can mute
the sounds.
• Muting2:
Selects this if this setting can mute
the sounds.
• Off:
Cancels the telephone muting.
Note:
With the CD or CD changer selected as the source,
playback pauses during telephone muting.
To select the amplifier gain control
—Amp.Gain
You can change the maximum volume level of
this unit. When the maximum power of the
speakers is less than 50 W, select "LowPower" to
prevent them from being damaged.
• LowPower: You can adjust the volume level
from "Volume 00" to "Volume 30."
Note:
If you change the setting from
"HighPower" to "LowPower" while
listening at a volume level more than
30, the unit automatically changes the
volume level to "Volume 30."
• HighPower: You can adjust the volume level
from "Volume 00" to "Volume 50."
To turn the slot light on or off—SlotLight
You can turn off the slot light if you do not want
the illumination each time you insert/eject the
disc or when you change the control panel angle.
• On:
Activates the illumination.
• Off:
Deactivates the illumination.
39
Advertisement
Table of Contents
