Using The Hdr Filter; Using The Ink Rubbing Filter - Pentax WG-3 GPS Operating Manual

7
Use the four-way controller (23) to select [Overwrite] or
[Save as].
8
Press the 4 button.
The image processed with the filter is saved.

Using the HDR Filter

Adjusts parts of the image that are too bright or too dark and processes images
to simulate an HDR effect.
1
Enter Q mode and use the four-way controller (45) to
choose the image you want to edit.
2
Use the four-way controller (2345) to select
Filter) from the Playback Mode Palette.
3
Press the 4 button.
5
The preview image of the results of the filter effect appears.
4
Press the 4 button.
A confirmation dialog for overwriting the image appears.
If the selected image is protected, the processed image is saved as a new image
and the confirmation dialog does not appear.
5
Use the four-way controller (23) to select [Overwrite] or
[Save as].
6
Press the 4 button.
The image processed with the filter is saved.

Using the Ink Rubbing Filter

You can edit the image to look like an ink rubbing.
The Ink Rubbing Filter cannot be used on the following images.
• Movies or images taken in F (Digital Panorama) or
• Images taken with the recorded pixels of
• Images taken with other cameras
An error message appears in step 3.
1
Enter Q mode and use the four-way controller (45) to
choose the image you want to edit.
150
(HDR
(Report) mode
, h, h, l, or m