If you accidentally select the wrong language and go to the next procedure, perform
the following operation to set the language back.
When the Wrong Language Has Been Inadvertently Selected
1
Press the four-way controller (5).
2
Use the four-way controller (2345) to select the desired
language and press the 4 button.
The [Initial Setting] screen appears in the selected language.
When the Screen After Step 2 Appears in the Wrong Language
1
Press the 3 button.
This exits the setting screen and returns the camera to capture mode.
2
Press the 3 button.
The [A Rec. Mode] menu appears.
3
Press the four-way controller (5) twice.
4
Use the four-way controller (32) to select [Language/
5
Press the four-way controller (5).
The [Language/
6
Use the four-way controller (2345) to select the desired
language.
7
Press the 4 button.
The [W Setting] menu appears in the selected language.
The language is now switched to your desired language. To reset [Hometown], [Date]
and [Time], refer to the pages below for instructions.
• To change the Hometown city, follow the steps in "Setting the World Time"
(1p.173).
• To change the date and time, follow the steps in "Changing the Date and Time"
(1p.170).
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the [Initial Setting] screen. See the following pages for information on
the available video output formats and how to change the output format.
• Video output formats available initially: "List of World Time Cities" (1p.220)
• To change the video output format: "Changing the Video Output Format" (1p.180).
] screen appears.
1
].
45