Sony MZ-R500PC Service Manual page 26

MZ-R500/R500PC
• Modified Data Writing Method (version 1.100)
1. Select the manual mode of the test mode, and set item number
022 (see page 13).
This set LCD display
0 2 2
[ENTER]
2. Press the key and set the address & adjusted value
display (see page 14).
This set LCD display
0 22
CC: Adjusted value
3. Press the X key to initialize the patch data.
This set LCD display
0 2 2
DD: Adjusted value
4. Select the manual mode of the test mode, and set item number
023 (see page 13).
This set LCD display
0 2 3
[ENTER]
5. Press the key and set the address & adjusted value
display (see page 14).
This set LCD display
0 2 3
###: Address
00: Adjusted value
[VOL+]
6. Press the key once to change the adjusted value to 01.
[T.MARK] + [PAUSE]
7. Press the
data write mode.
(The following display will appear where 00 is blinking)
This set LCD display
0 2 3
00: Adjusted value
8. Press the key.
X
(0D5C is blinking)
[VOL+]
9. Press the key once to change the blinking portion to
0D5D.
This set LCD display
0 23
00: Adjusted value
10. Press the x key.
(00 is blinking)
26
PatClr
SCC
SDD
Patch
###S00
keys to activate the patch
0D5C00
0D5D00
[VOL+]
11. Adjust with the key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
AA.
This set LCD display
0 2 3
AA: Adjusted value
12. Press the key.
X
(0D5D is blinking)
[VOL+]
13. Press the key once to change the blinking portion to
0D5E.
This set LCD display
0 2 3
00: Adjusted value
14. Press the x key.
(00 is blinking)
[VOL+]
15. Adjust with the key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
04.
This set LCD display
0 2 3
04: Adjusted value
16. Press the key.
X
(0D5E is blinking)
[VOL+]
17. Press the key to change the blinking portion to 0D61.
This set LCD display
0 2 3
00: Adjusted value
18. Press the x key.
(00 is blinking)
[VOL+]
19. Adjust with the key (adjusted value up) or
key (adjusted value down) so that the adjusted value becomes
20.
This set LCD display
0 2 3
20: Adjusted value
20. Press the key.
X
(0D61 is blinking)
[VOL+]
21. Press the key to change the blinking portion to 0D64.
This set LCD display
0 2 3
00: Adjusted value
22. Press the x key.
(00 is blinking)
[VOL--]
0D5DAA
0D5E00
[VOL--]
0D5E04
0D6100
[VOL--]
0D6120
0D6400