Front Hydraulic Brake - Generic TR 125 Service Manual

Deviation of wheels
Block or restriction in brake hose joints
Bending/incompletion of braking plate
Caliper slides abnormally
1.2.6
Brake drag
Braking footstep/plate is dirty
Deviation of wheels
Abrasive wear of braking footstep/plate
Bending/incompletion of braking plate
Caliper slides abnormally
1.2.7
Brake handle/footstep is hard
Block or restriction of brake system
Adhere/abrasive wear of caliper piston
Caliper slides abnormally
Block/restriction of brake fluid pipe
Sealing gasket abrasive wear of caliper piston
Adhere/abrasive wear of master cylinder piston
Braking handle/footstep is curving

1.3 Front Hydraulic Brake

1.3.1 Removal
* Attention
• Replace braking shoe assembly.
• If a braking shoe assembly will be used
again, please mark it on the side before
removal so as to re-install it to its
original place.
Loosen brake cylinder units and fix bolts.
Disassemble brake cylinder units from front damper
Disassemble the following units from front damper:
Front liquid brake block
1. Braking shoe
2. Front brake block oil pipe
3. Brake cylinder units
- 36 -