Idle Speed Adjustment - Generic TR 125 Service Manual

Voltmeter shall be used for charging
inspection.
Charging
Connection method: Positive pole of battery charger is connected to battery positive lead wire;
Negative pole of battery charger is connected to battery negative lead wire.
Warning!
• Battery shall be away from fire.
• Shut off charger switch first before or
after charging in case sparks may be
generated at connection parts, which may
result in explosion.
• During charging, please take the
current time labeled on the battery as
basic time.
* Attention
• Battery quick recharging is not
recommended except
emergency.
• After recharging,
30minutes and then measure the battery
voltage.
Recharging current:
Recharging time:
After recharging:
Restrictor

Idle speed adjustment

*Attention
Perform idle speed adjustment when the
engine is warm.
Warm up the engine and then adjust idle speed.
Run the engine and connect engine tachometer.
Adjust the throttle cable lock-screw to specified RPM.
Idle speed RPM: 1,700±100rpm/min
in case of
wait at least
Standard: 0.4A
Quick recharging: 4.0A
Standard: 10-15hours
Quick recharging: 30minutes
Closed circuit voltage: over 12.8V
- 23 -