Generic TR 125 Service Manual page 36

Change a new tyre when decorative pattern depth on tyre
middle reaches the degree of the right picture.
Minimum decorative pattern depth
Front tyre
Back tyre
Warning:
Do not try to mend damaged tyre because wheel
balance and tyre reliability may be worsen.
To inflate tyre in a wrong way will cause unusual
tread abrasive wear and threaten safety. To inflate
tyre less may cause slipping or casting and cause
tyre deflate.
When tyre is abrased over, it is dangerous to drive
and goes against ground adhesion and driving.
Check if lock nut of front shaft is loosened.
Check if lock nut of rear shaft is loosened.
If loosened, tighten it to specified torque.
Torsion force: Front shaft
Back shaft nut
Steering Stem Bearing and Handle
Fixation
Move the left and right handle and check if lead wires disturb
it.
Rotate front wheel and confirm handle can move smoothly.
If the handle does not move smoothly and is loosened, check
steering stem bearing.
1.6mm
2.0mm
100-113N·m
100-113N·m
- 31 -
Check of
left / right
action