System Status - Dell Force10 S4820T System Getting Started Manual

System Status

You can view S4820T status information in several ways, including LEDs and
boot menu options. You can also view status information through the
command line interface (CLI) show commands and with simple network
management protocol (SNMP). For more information about these options,
refer to the FTOS Command Line Reference Guide and FTOS Configuration
Guide for the S4820T System.
As shown in Figure
PSU side of the chassis.
Figure 1-3. Port LEDs
System LED
8
Hardware Overview
1-3, the S4820T includes LED displays on both the I/O and
2
1
4
3
6 7
5
6
1 - Locator LED (Blue)
2 - Stack LED (Blue/Green)
3 - Temp LED (Red)
4 - Diag LED (Green)
5 - FAN LED (Green/Red)
6 - Link LED (Green/Amber)
7 - Activity LED (Blinking
Green)
7