Subaru SGX3500 Service Manual page 36

7-4-3 FRONT COVER
(1) Attach the front cover to the engine main bearing cover.
SGX3500
5/16-24 flange bolt . . . 4 pcs.
SGX 5000 / 7500
3/8-16 flange bolt . . . 4 pcs.
7-4-4 ROTOR
(1) Wipe off oil, grease and dust from the
tapered portion of engine shaft and
matching tapered hole of rotor shaft.
(2) Mount the rotor to the engine shaft.
Tighten the through bolt.
flange bolt . . . 1 pc.
7-4-5 STATOR
(1) Put the rear cover on the stator and pull
out the stator wirings through the opening
of the rear cover.
(2) Tighten the stator and the rear cover
With flange bolt and nut.
- 34 -