Subaru SGX3500 Service Manual page 33

(3) Frame and accessories
NOTE :
Do not put fuel or lubricant in the generator before installing the feet, wheels and handles.
INSTALLING THE WHEELS
Wheels are provided to assist in moving the generator to the desired location and
should be installed on the opposite side of the handle
Locate the following items:
2 Bolts(3/8-16 ×4-1/4in.)
2 Washers(3/8 in.)
2 Spacers(0.38in.ID)
2 Wheels
2 Lock nuts(3/8-16)
Tightening torque: 8 to 12N·m (80 to 120kg·cm)
Locate the following items:
2 Rubber feet
2 Rubber support
2 Lock nuts(1/4-20)
2 Washers(M6)
2 Bolts(1/4-20×115mm)
Tightening torque: 2 to 3N·m (20 to 300kg·cm)
NOTE:
Be careful not to over tighten so that foot material collapses.
Repeat with remaining foot.
Locate the following items:
2 Handles
2 Bolts(5/16-8×2-1/4in.)
2 Washers(5/16in.)
2 Lock nuts(5/16in.)
2 Nylon washer(5/16in.)
Tightening torque: 4 to 6N·m (40 to 60kg·cm)
2 Handle lock pins
2 Lanyards
- 31 -