Switching The Device On And Off; Adjusting The Volume; Display Control - Skoda Columbus Owner's Manual

A - Switch on voice control  page 8, "Voice control of the radio
14 
navigation system"
A
Menu button:
15
− RADIO mode - turn for manual station adjustment; press briefly to
start/stop the automatic play (Scan).
− MEDIA-Mode - turn to change track; press briefly to start/stop the
automatic play (Scan) when in audio mode.
− Turn map display (MAP) - in order to change the map scale; press
briefly for repeating a navigation announcement during active
route guidance.
− Navigation (NAV)- press briefly to repeat a navigation announce-
ment during active route guidance.
A Memory card case  page 18, "Memory card"
16

Switching the device on and off

– To switch the unit on/off, press the button
After switching on the unit, the last audio source that was active before switching
off will be played.
If the key is pulled out of the ignition lock while the unit is switched on, the unit will
switch off automatically.
If your vehicle is fitted with the KESSY system, the unit will switch off automatically
after the engine is turned off and the door opened. If you open the door before
turning off the engine, the unit will not switch off until the vehicle is locked.
If the ignition is switched off, the system switches off automatically after approx.
half an hour (vehicle battery protection against discharging).

Adjusting the volume

– To increase the volume, turn the button
– To decrease the volume, turn the button
The change to the volume appears in the unit display.
If the volume is reduced to 0, the speakers are muted. The following symbol will

appear in the display .
A .
1
A
to the right.
1
A
to the left.
1
Caution
High volumes can cause hearing damage.

Display control

Fig. 1 Setup mode SETUP: Main menu setup/radio setup
The display on the unit is a so-called touch screen. Fields circled in colour on the
touch-screen are presently "active" and are operated by touching the screen.
"Function keys" in the display
– Active fields, which call up a function or a menu, are called "function keys".
– In the main menu Setup click the function key
 fig.
the Setup Radio 1. The headline indicates which menu you are in
– By using the function key A
 B
previous menu.
Moving objects or sliding regulators
– Place your finger on the display of a moving object on the display, for example
the "sliding regulator" A  fig.
E
– Now move your finger over the touch-screen without interruption. The object
will follow your movements, but can only be moved within the pre-defined
range.
– Lift the finger from the touch-screen at the desired position.
– To be able to view the displayed area of the screen
regulator all the way down.
General information
 fig. 1 to call the menu for
Radio
you can change back from each menu to the
1.
 fig.
1, move the sliding
5
BAT-20F001
A
.
A