Adjusting The Dp Center Line - Kyocera KM-1500 Service Manual

(13) Adjusting the DP center line

Perform the following adjustment if there is a regular error between the centers of the original and the copy image.
U034 U067
(P. 1-6-42) (P. 1-6-48)
Caution:
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
Enter maintenance mode.
Enter "072" using the copy exposure
adjustment keys or zoom +/- keys
Press the start key.
Press the program key and the
machine enters the test copy mode.
Place an original on the DP
and make a test copy.
Is the image correct?
Yes
Press the stop/clear key
to exit maintenance mode.
U072
Start
No
End
Reference
Original
Press the start key.
The new setting
is stored.
Change the setting.
• For copy example 1, increase
the value using the zoom (+)
key.
• For copy example 2, decrease
the value using the zoom (-) key.
Setting range: –6.6 – +6.6
Initial setting: 2.7
Changing the value by 1 moves
the center line by 0.17 mm.
Copy Copy
example 1 example 2
Figure 1-6-63
2DC-2
1-6-53