Adjusting The Scanner Leading Edge Registration - Kyocera KM-1500 Service Manual

(7) Adjusting the scanner leading edge registration

Perform the following adjustment if there is regular error between the leading edges of the copy image and original.
U034
U066
(P. 1-6-41)
Caution:
Before making the following adjustment, ensure that the above adjustments have been made in maintenance mode.
Procedure
Enter maintenance mode.
Enter "066" using the copy exposure
adjustment keys or zoom +/- keys.
Press the start key.
Press the program key and the
machine enters the test copy mode.
Place an original and press
the start key to make a test copy.
Is the scanner
leading edge registration
Press the stop/clear key to
exit maintenance mode.
U071
(P. 1-6-51)
Start
No
correct?
Yes
End
Original
Press the start key.
The new setting
is stored.
For copy example 1, decrease
the value using the zoom (–) key.
For copy example 2, increase
the value using the zoom (+) key.
Setting range : –32 – +32
Initial setting: 0
Changing the value by 1 moves
the leading edge by 0.17 mm.
Copy
Copy
example 2
example 1
Figure 1-6-57
2DC
1-6-47