Casio DT-X7 Series Quick Start Manual page 72

When using eMbedded Visual C++ 4.0
1. Establish a connection between the Device Emulator and PC via ActiveSync before starting
debugging in eMbedded Visual C++ 4.0. For establishing connection via ActiveSync, refer to
Chapter 7.3.3 "Connecting via ActiveSync".
2. Navigate to Build in the menu bar → Start Debug → Go to start up debugging.
Figure 7.22
3. Similar to ordinary debugging operations with an actual DT-X7, the Device Emulator allows break
point setting (circled in red in Figure 7.22) in the source code and step-by-step debugging.
Figure 7.23
72