Topfield TRF-7160 User Reference page 82

74 Toppro Application Program
• TAPs must be situated in the Program Files folder; if they
Before you start the TAP, you will need to load the TAP file into
the program file menu by doing the following:
1. Press the
2. Insert the USB with the TAP file into your unit.
3. On the remote, press the
4. Use the navigation keys to highlight the TAP file.
5. Press the yellow button on top of the file.
6. It will prompt you that the file will be moved into the
NOTE
If you would like the TAP to start when the unit starts up,
move the TAP file into the Auto Start folder in the Program
Files menu.
To run a TAP in the digital receiver, take the following steps:
1. Press the
2. Place the highlight bar on a program file you want to run,
3. If it is a running-in-the-background program, its entry
4. To stop a program running in the background, place the
are placed in any other folder, they will be ignored.
button and then the
play the program files list.
top of the name of your external hard disk.
program files folder. Press
button and then the
play the program files list.
£
¢ ¡
and press the button to start it up.
OK
in the list gets marked in green when it starts. You may
have several programs run in the background at a time.
highlight bar on its entry in the list, and press the
button; otherwise you can stop it with the
or button to dis-
£ £
¢ ¡ ¢ ¡
button. Press the
SAT OK
£
¢ ¡
.
OK
or button to dis-
£
¢ ¡
button.
EXIT
on
£
¢ ¡
OK