Recording A Programme - Topfield TRF-7160 User Reference

News 24, ABC1, ABC2, ABC3, etc.). This recorder can record
two programmes on each channel frequency simutaneously.
(E.g. 10.TEN Digital plus 11.One HD and 90.GEM plus 99.Go!)
Whilst recording the above combination of programmes you
can also playback a pre-recorded show.

7.1 Recording a programme

When you are watching a different service from the service
being recorded, you will see a number on the centre of the
symbol, this indicates the order that the recording has started.
When you record two different channels from two different
stations, what you are actually doing is locking each tuner to
two separate station bandwidths.
For example, if you record channel 7TWO and channel 9 Digi-
tal, you have locked the first tuner into all the channels from 7
which includes: 7 Digital, 7 Digital 1, 7TWO and 7Mate. While
on the second tuner you have locked in all the channels from 9
which includes: 9 Digital, Gem and Go.
With this in mind, while the above two channels (eg. 7TWO
and 9 Digital) are being recorded, you can watch a third chan-
nel which can be only one of the following: 7 Digital, 7 Digital
1, 7Mate, Gem or Go.
The same can be said for recording for four channels (eg.
7TWO, 7Mate, 9 Digital and Go). You can watch an additional
channel which can be only one of the following: 7 Digital, 7
Digital 1 or Gem.
CAUTION
Do not move the digital receiver nor pull out the power
plug while it is running. It may cause damage to recorded
Once a recording gets started, a symbol like the left fig-
ure will be displayed at the top right of the screen for
a few seconds.
7.1 Recording a programme 41
7