Vista Extended Commands - BBV TX1500 system Installation Manual

VISTA Coax Extended Commands on the Tx1500Matrix
Supports 86 Presets Presets 1 thought to 88 except 33 & 34
Keyboard
91 Preset
92 Preset
93 Preset
94 Preset
1#
1# 1#
DomeMENUPassword"1234"
On the VPD-4WP-P-C/L if you press the Autopan Key nothing will happen until you either:
i) Press the Iris close and it will start a dome scan if saved.
ii) Use the joystick and it will go in to the menu Password screen.
RS422 (simplex) TELEMETRY OUT
TxB to Dome RB(-) = 5
TxB to Dome RB(-) = 5
DO NOT USE = 6
DO NOT USE = 7
SCREEN = 8
RJ45 breakout box
This port provides telemetry control via BBV RS422 (simplex). A Cat 5 RJ45 patch cable and breakout box is used to
connect the VISTA DOME CAMERAS via single twisted pair cable. It is possible to either wire the network in a daisy
chained or star configuration using an optional RS422 Starcard.
TX1500 Manual V3.5 Dec 07
VISTA COAX Command Keyboard VISTA COAX Command
RUN Learn 1
RUN Learn 2
Program Learn 1
Program Learn 2
Enter Dome Menu (min idome) VPD-4WP-P-C/L
Enter Dome Menu (VISTA POWER DOME)
DO NOT USE = 6
SCREEN = 7
SCREEN = 8
4 = TxA to Dome RA(+)
3 = DO NOT USE
2 = DO NOT USE
1 = DO NOT USE
Page 21 of 40 MATRIX PROGRAMMING/USER GUIDE
1 Patrol RUN Tour 1
2 Patrol RUN Tour 2
Iris Open Enter
Iris Close ESC
4 = TxA to Dome RA(+)
3 = DO NOT USE
2 = DO NOT USE
1 = DO NOT USE
G G
R R
N N
A B
D D
Dome 1 Dome 2
G
R R R R
N
A B A B
D
Dome 3