Sound Adjustments; Turning On/Off The Loudness Function; Selecting Preset Sound Modes; Adjusting The Sound - JVC KS-FX210 Instructions Manual

Turning on/off the loudness
function
The human ear is less sensitive to low and high
frequencies at low volumes.
The loudness function can boost these frequencies to
produce a well-balanced sound at low volume levels.
Each time you press LOUD, the loudness function
turns on and off alternately.
LOUD

Selecting preset sound modes

You can select a preset sound adjustment suitable
to the music genre.
Each time you press SOUND, the sound mode
changes as follows:
SOUND
Indication For
SCM OFF (Flat sound)
BEAT Rock or disco music
POP Light music
SOFT Quiet background music +1
Notes:
• You can adjust the preset sound mode to your
preference, and store it in memory.
If you want to adjust and store your original sound
mode, see "Storing your own sound adjustments" on
page 12.
• To adjust only the bass and treble reinforcement
levels to your preference, see "Adjusting the sound"
on page 11.
• When one of the sound modes is selected, it is shown
on the display as follows:
For example, when "POP" is selected.

SOUND ADJUSTMENTS

LOUD
LOUD
(BEAT) (POP) (SOFT)
Preset values
BAS TRE LOUD
00 00 On
+2 00 On
+4 +1 Off
–3 Off

Adjusting the sound

You can adjust the sound characteristics to
your preference.
1
Select the item you want to adjust.
Each time you press the button,
the adjustable items change as
follows:
(Bass) (Treble)
Indication To do
BAS Adjust the bass
(Bass)
TRE Adjust the treble
(Treble)
FAD* Adjust the front
(Fader)* and rear speaker
balance
BAL Adjust the left
(Balance)
and right speaker
balance
VOL Adjust the volume
(Volume)
Note:
* If you are using a two-speaker system, set the fader
level to "00".
2
Adjust the level.
Note:
Normally the + and – buttons work as the volume
control buttons. So you do not have to select
"VOL" to adjust the volume level.
(Fader) (Balance) (Volume)
Range
–6 (min.)
|
+6 (max.)
–6 (min.)
|
+6 (max.)
R6 (Rear only)
|
F6 (Front only)
L6 (Left only)
|
R6 (Right only)
00 (min.)
|
50 (max.)
To increase the level.
To decrease the level.
11