Dodge 1500 User Manual page 60

UTILITY
NOTE: Provisions are provided in the
bins for cargo dividers and shelf
supports. These accessories (in
addition to other RamBox
accessories) are available from
MOPAR ® .
®
RamBox Storage Bin Cover
Emergency Release Lever
• As a security measure, a Storage
Bin Cover Emergency Release is
built into the storage bin cover
latching mechanism.
NOTE: In the event of an individual
being locked inside the storage bin, the
storage bin cover can be opened from
inside of the bin by pulling on the
glow-in-the-dark lever attached to the
storage bin cover latching mechanism.
Bed Extender
• The bed extender has three
functional positions:
• Storage Position
• Divider Position
• Extender Position
Storage Position
• The storage position for the bed
extender is at the front of the truck
bed.
• To install the bed extender into the
storage position, perform the
following:
• Make sure the center handle is
unlocked using the vehicle key
and rotate the center handle
vertically to release the extender
side gates.
• With the side gates open,
position the extender fully
forward in the bed against the
front panel.
• Rotate the side gates closed
allowing the outboard ends to be
58
®
Divider Position
Extender Position
positioned in front of the cargo
tie-down loops.
• Rotate the center handle
horizontally to secure the side
gates in the closed position.
• Lock the center handle using the
vehicle key to secure the panel
into place and assist against
theft.
• There are 11 divider slots along the
bed inner panels which allow for
various positions to assist in
managing your cargo.
• To install the bed extender into a
divider position perform the
following:
• Make sure the center handle is
unlocked using the vehicle key
and rotate the center handle
vertically to release the extender
side gates.
• With the side gates open,
position the extender so the
outboard ends align with the
intended slots in the sides of the
bed.
• Rotate the side gates closed so
that the outboard ends are
secured into the intended slots
of the bed.
• Rotate the center handle
horizontally to secure the side
gates in the closed position.
• Lock the center handle to secure
the panel into place and assist
against theft.
• The bed extender will add an
additional 15 in (38 cm) in the back
of the truck when additional cargo
room is needed.