Dodge 1500 User Manual page 17

Power Lumbar
• The lumbar controls are located on the outboard side of the seat cushion. The
lumbar support can be increased by pressing the front of the switch and
decreased by pressing the back of the switch.
Memory Seats
• The memory seat feature allows you to save the driver's seat position
(excluding lumbar position), driver's outside mirror position, adjustable brake
and accelerator pedals, Automatic Temperature Control (ATC) temperature
setting and radio station preset settings. The driver's memory buttons are
located on the outboard side of the driver's seat cushion.
• Adjust all memory profile settings, press the SET button, then press 1 or 2
within five seconds.
• To program a Key Fob to the memory position, place the ignition switch in the
LOCK position and remove the Key Fob, press and release the LOCK button
on the Key Fob to be programmed within 5 seconds of pressing button 1 or 2.
• Press 1 or 2 to recall the saved positions, or press UNLOCK on the
programmed Key Fob.
• Refer to the Owner's Manual on the DVD for further details.
Manual Seats
Forward/Rearward
Recliner
GETTING STARTED
• Lift up on the adjusting bar located
at the front of the seat near the floor
and release at the desired position,
then release the handle to lock the
seat into position.
• Lift the recliner lever located on the
outboard side of the seat, lean back
and release at the desired position.
15