Maintenance List - Panasonic KX-FL612CX Service Manual

KX-FL612CX / KX-FL612CX-S
4.1.2.1.

Maintenance List

NO. OPERATION
1 Document Path
2 Rollers
3 Sensors
4 Glass
5 Abnormal, wear and tear
or loose parts
4.1.2.2. Maintenance Cycle
No.
1 ADF Separation Roller (Ref.No.50)
2 Paper Feed Roller (Ref.No.154)
3 ADF Separation Rubber (Ref. No.35)
4 ADF Exit Roller (Ref.No.34)
5 Pick up Roller (Ref No.108)
6 Separation Rubber (Ref. No.99)
7 Document Feed Roller (Ref.No.154)
8 Transfer Roller (Ref.No.73)
9 Pressure Roller (Ref.No.120)
10 Heat Roller (Ref.No.127)
11 Exit Roller (Ref.No.142)
If each part has got dirty, clean it with a damp cloth then dry thoroughly.
* These values are standard and may vary depending on usage conditions.
Remove any foreign matter such as paper.
If the roller is dirty, clean it with a damp cloth then dry
thoroughly.
Document sensor (PS500), Paper feed sensor (PS501), Printer
cover open switch (SW101),ADF cover open sensor (SW501),
FB cover open sensor (SW500), ADF CIS position sensor
(PS502),FB CIS position sensor (PS503)Resist sensor (PC201)
,Paper exit sensor (PS50). Paper sensor (PS1)Confirm the
operation of the sensors.
If the glass is dirty, clean them with a dry soft cloth.
Replace the part. Check if the screws are tight on all parts.
Item Cleaning Cycle
CHECK
Cycle
3 months 7 years* (100,000 documents) Refer to HOW TO REMOVE THE
3 months 7 years (100,000 documents) Refer to HOW TO REMOVE THE
3 months 7 years (100,000 documents) Refer to HOW TO REMOVE THE
3 months 7 years (100,000 documents) Refer to HOW TO REMOVE THE
3 months 7 years (100,000 documents) Refer to HOW TO REMOVE THE
3 months 7 years (100,000 documents) Refer to HOW TO REMOVE THE
3 months 7 years (100,000 documents) Refer to
3 months 7 years (100,000 documents) Refer to HOW TO REMOVE THE
3 months 7 years (100,000 documents) Refer to FUSER SECTION
3 months 7 years (100,000 documents) Refer to FUSER SECTION
3 months 7 years (100,000 documents) Refer to FUSER SECTION
28
REMARKS
—
Refer to MAINTENANCE CHECK
ITEMS/COMPONENT LOCATIONS(
P.27).()
See MAINTENANCE CHECK
ITEMS/COMPONENT LOCATIONS(P.27)
and SENSORS AND SWITCHES
SECTION(P.175)TEST FUNCTIONS(P.64)
Refer to MAINTENANCE(P.32).
—
Replacement
Procedure
SEPARATION ROLLER (P.49).
SEPARATION RUBBER (P.47).
SEPARATION RUBBER (P.47).
SEPARATION RUBBER (P.47).
PICK UP UNIT (P.45).
PICK UP ROLLER (P.44).
HOW TO REMOVE THE
SEPARATION RUBBER (P.47)
TRANSFER ROLLER (P.48).
(P.225).
(P.225).
(P.225).